How much does pallet rack cost in Brooklyn Park?

Price depends on pallet positions, rack height, beam capacity, decking, freight and installation. Send your pallet size, heaviest load per level, clear height and building size for a free CAD layout and an itemized quote. We supply new material only.

How much weight can pallet rack hold?

There is no single capacity for pallet rack: beam capacity is rated per pair, per level, and frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and put the capacities for the finished configuration on load plaques.

What type of pallet rack do I need?

Selective teardrop rack is the starting point for mixed SKUs and direct access; pushback stores each SKU 2–6 pallets deep using LIFO. Pallet flow suits FIFO and dated stock, drive-in suits bulk quantities of few SKUs, cantilever supports long loads, and carton flow serves case picking. We compare the systems against your inventory and handling equipment before recommending one.

How long does it take to get and install pallet rack?

Standard teardrop sizes often quick-ship; high-density systems and non-standard sizes take longer, and delivery lead time is confirmed on your quote. Installation time depends on bay count and site readiness, including an empty work area and unloading access.

Do you install pallet rack?

Yes. We handle design, supply and installation with experienced installation crews we schedule and manage. The rack is anchored to the floor, and the completed layout and load plaques are reviewed at handover.

Drive-In Rack storage system — Brooklyn Park service area

Brooklyn Park, Minnesota

Drive-In Rack in Brooklyn Park, MN

For a Brooklyn Park operator dealing with large reserve quantities crowding smaller active SKU locations, the immediate question is how to make the next receiving or shipping cycle work without sacrificing usable storage. Along Highway 169 and Boone Avenue, a flex suite and a higher-clear warehouse can offer very different rack heights and aisle geometry.

Drive-In Rack in Brooklyn Park, MN starts with that constraint. If bulk quantities are using floor that could be organized into dedicated storage lanes, we compare continuous pallet support rails inside lanes entered by the forklift against your current arrangement. Request a free design consultation and an itemized quote before ordering the system or scheduling the move.

(612) 509-6602

Why Brooklyn Park Warehouses Work With Us

A project near 93rd Avenue should be planned around the work happening inside that particular Brooklyn Park building. Along Highway 169 and Boone Avenue, a flex suite and a higher-clear warehouse can offer very different rack heights and aisle geometry. We map receiving, production and shipping access before setting storage positions.

For medical device supply and light manufacturing operations around the northwest metro Highway 169 corridor, drive-in rack needs to support deep reserve storage with limited direct access. Measure the forklift mast, load backrest and operating clearance before fixing lane width. Dedicate lanes to compatible loads and quantities, verify pallet rail bearing, and agree one-ended or two-ended access against the rotation requirement. The layout and itemized quote make those decisions visible before components are ordered.

Warehouse Equipment & Supplies Co. provides the storage consultation through Minneapolis Pallet Rack. You keep one point of contact for the proposed layout, scope and scheduling discussions. We review access from Highway 169 and the space available for unloading, and identify the work zones that must be isolated.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

Storage Planning in Brooklyn Park

Nearby areas we work in regularly include 93rd Avenue, Highway 169, Boone Avenue.

Medical device supply

Light manufacturing

Regional distribution

How Drive-In Rack Works

Fewer access aisles. The forklift enters the structure to store multiple pallets of the same SKU in depth.

Continuous rails, not beams

Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

The truck enters the lane

The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

One open end or two

One open end provides last-in, first-out storage from a single access aisle. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides.

Guarding built into the design

Guide rails, column guards, and rail-end protection are part of the spec from the start, because forklifts operate inside the structure and the layout needs protection from contact.

What a Drive-In Rack Project Includes

A drive-in rack project in Brooklyn Park begins with a load and workflow review. We collect dimensions, maximum weights, SKU quantities and movement rates, then check clear height, column spacing, floor condition and forklift specifications against the proposed storage zone. We also ask how receiving, inspection and shipping share the floor so recovered positions do not simply create another congestion point.

Measure the forklift mast, load backrest and operating clearance before fixing lane width. Dedicate lanes to compatible loads and quantities, verify pallet rail bearing, and agree one-ended or two-ended access against the rotation requirement. The free design consultation turns these inputs into a proposed layout with storage counts, elevations and access paths. Where two systems could work, the comparison shows the storage and operating trade-offs instead of presenting a single answer without the math.

The itemized scope identifies new rack components, supports, protection and installation. Our team handles the permit side for you. Manufacturer compatibility and actual capacities are checked before approval. Delivery timing and staging are discussed against available unloading space, and the installation area must be emptied and isolated from live warehouse traffic.

Installation and handover follow the approved drawing. Moving parts on flow or pushback systems require travel checks with representative loads; fixed systems require their specified alignment and protection, with the rack anchored to the floor. The completed Brooklyn Park arrangement includes the agreed capacity documentation and operating guidance. If future changes add levels, heavier loads or a new product mix, the configuration should be reviewed again rather than assuming the original ratings still apply.

High volume of a small number of SKUs

Seasonal or buffer inventory held in bulk

Cold storage and freezer rooms where cube matters most

Product too fragile to floor-stack more than two high

Buildings where floor space, not height, is the binding constraint

Call (612) 509-6602

Recent Installations

Racking projects completed for warehouses across the Twin Cities metro.

View More Projects

Get a Drive-In Rack Quote for Your Brooklyn Park Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (612) 509-6602.

Minneapolis Pallet Rack

2429 Nicollet Ave.

Suite C

Minneapolis, MN 55404

(612) 509-6602

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Minneapolis Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.