How do I find out my warehouse pallet position count in Brooklyn Park?

The count depends on clear height, aisle width and the forklift you operate. Our free CAD layout gives you the exact pallet position count for the proposed arrangement before you buy, with receiving and shipping space accounted for.

How wide should my forklift aisles be?

Your lift truck sets the aisle width: counterbalance trucks typically need about 12–13 ft, reach trucks about 8–10 ft, and very-narrow-aisle equipment about 5–6 ft. Confirm the truck specification and actual load dimensions; aisle width drives storage density more than almost any other layout choice.

Will new pallet rack connect to the rack I already have?

Usually, if the connection matches and the existing configuration can support the addition. "Teardrop" is not universal across manufacturers: send photos of the upright face, beam connector and any label so we can match new components and check the finished load ratings.

What determines the price of pallet rack?

Price depends on pallet positions, rack height, beam capacity, decking, freight and installation. Send your pallet size, heaviest load per level, clear height and building size for a free CAD layout and an itemized quote. We supply new material only.

When can my pallet rack be delivered and installed?

Standard teardrop sizes often quick-ship; high-density systems and non-standard sizes take longer, and delivery lead time is confirmed on your quote. Installation time depends on bay count and site readiness, including an empty work area and unloading access.

Cantilever Rack storage system — Brooklyn Park service area

Brooklyn Park, Minnesota

Cantilever Rack in Brooklyn Park, MN

For a Brooklyn Park operator dealing with fabrication stock taking over the floor beside machinery, the immediate question is how to make the next receiving or shipping cycle work without sacrificing usable storage. Along Highway 169 and Boone Avenue, a flex suite and a higher-clear warehouse can offer very different rack heights and aisle geometry.

Cantilever Rack in Brooklyn Park, MN starts with that constraint. If long stock cannot be supported properly in ordinary pallet bays, we compare open-front columns, bases and arms sized to the material bundles against your current arrangement. Request a free design consultation and an itemized quote before ordering the system or scheduling the move.

(612) 509-6602

Why Brooklyn Park Warehouses Work With Us

A project near 93rd Avenue should be planned around the work happening inside that particular Brooklyn Park building. Along Highway 169 and Boone Avenue, a flex suite and a higher-clear warehouse can offer very different rack heights and aisle geometry. We map receiving, production and shipping access before setting storage positions.

For medical device supply and light manufacturing operations around the northwest metro Highway 169 corridor, cantilever rack needs to support supported long-load storage without a front beam. Measure bundle length and weight, not just the space currently occupied. Set arm length and support spacing to prevent sag, check single-sided versus double-sided loading, and leave turning clearance for the equipment carrying the longest bundle. The layout and itemized quote make those decisions visible before components are ordered.

Warehouse Equipment & Supplies Co. provides the storage consultation through Minneapolis Pallet Rack. You keep one point of contact for the proposed layout, scope and scheduling discussions. We review access from Highway 169 and the space available for unloading, and identify the work zones that must be isolated.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Storage Planning in Brooklyn Park

Nearby areas we work in regularly include 93rd Avenue, Highway 169, Boone Avenue.

Medical device supply

Light manufacturing

Regional distribution

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

A cantilever rack project in Brooklyn Park begins with a load and workflow review. We collect dimensions, maximum weights, SKU quantities and movement rates, then check clear height, column spacing, floor condition and forklift specifications against the proposed storage zone. We also ask how receiving, inspection and shipping share the floor so recovered positions do not simply create another congestion point.

Measure bundle length and weight, not just the space currently occupied. Set arm length and support spacing to prevent sag, check single-sided versus double-sided loading, and leave turning clearance for the equipment carrying the longest bundle. The free design consultation turns these inputs into a proposed layout with storage counts, elevations and access paths. Where two systems could work, the comparison shows the storage and operating trade-offs instead of presenting a single answer without the math.

The itemized scope identifies new rack components, supports, protection and installation. Our team handles the permit side for you. Manufacturer compatibility and actual capacities are checked before approval. Delivery timing and staging are discussed against available unloading space, and the installation area must be emptied and isolated from live warehouse traffic.

Installation and handover follow the approved drawing. Moving parts on flow or pushback systems require travel checks with representative loads; fixed systems require their specified alignment and protection, with the rack anchored to the floor. The completed Brooklyn Park arrangement includes the agreed capacity documentation and operating guidance. If future changes add levels, heavier loads or a new product mix, the configuration should be reviewed again rather than assuming the original ratings still apply.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (612) 509-6602

Recent Installations

Racking projects completed for warehouses across the Twin Cities metro.

View More Projects

Get a Cantilever Rack Quote for Your Brooklyn Park Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (612) 509-6602.

Minneapolis Pallet Rack

2429 Nicollet Ave.

Suite C

Minneapolis, MN 55404

(612) 509-6602

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Minneapolis Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.