What type of pallet rack do I need in Brooklyn Park?

Selective teardrop rack is the starting point for mixed SKUs and direct access; pushback stores each SKU 2–6 pallets deep using LIFO. Pallet flow suits FIFO and dated stock, drive-in suits bulk quantities of few SKUs, cantilever supports long loads, and carton flow serves case picking. We compare the systems against your inventory and handling equipment before recommending one.

What size pallet rack do I need?

For standard 48-inch-deep pallets, 42-inch-deep uprights are a common starting point; common beam lengths are 96 inches for two 40-inch-wide pallets, 108 inches, and 144 inches for three. Rack height depends on building clear height and forklift lift height. Measure your real pallets, including load overhang, before choosing components.

How much weight can pallet rack hold?

There is no single capacity for pallet rack: beam capacity is rated per pair, per level, and frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and put the capacities for the finished configuration on load plaques.

Do you install pallet rack?

Yes. We handle design, supply and installation with experienced installation crews we schedule and manage. The rack is anchored to the floor, and the completed layout and load plaques are reviewed at handover.

Carton Flow Rack storage system — Brooklyn Park service area

Brooklyn Park, Minnesota

Carton Flow Rack in Brooklyn Park, MN

For a Brooklyn Park operator dealing with component cartons competing with pallet replenishment, the immediate question is how to make the next receiving or shipping cycle work without sacrificing usable storage. Along Highway 169 and Boone Avenue, a flex suite and a higher-clear warehouse can offer very different rack heights and aisle geometry.

Carton Flow Rack in Brooklyn Park, MN starts with that constraint. If case pickers keep walking and reaching while replenishment interrupts the pick face, we compare inclined wheel beds, lane dividers and front stops sized to actual cartons against your current arrangement. Request a free design consultation and an itemized quote before ordering the system or scheduling the move.

(612) 509-6602

Why Brooklyn Park Warehouses Work With Us

A project near 93rd Avenue should be planned around the work happening inside that particular Brooklyn Park building. Along Highway 169 and Boone Avenue, a flex suite and a higher-clear warehouse can offer very different rack heights and aisle geometry. We map receiving, production and shipping access before setting storage positions.

For medical device supply and light manufacturing operations around the northwest metro Highway 169 corridor, carton flow rack needs to support a fixed forward pick face replenished from behind. Build the lane plan from case dimensions, carton stiffness and picks per SKU. Allocate enough reserve between replenishment runs, test both light and heavy cases, and keep hand-picking space separate from forklift replenishment. The layout and itemized quote make those decisions visible before components are ordered.

Warehouse Equipment & Supplies Co. provides the storage consultation through Minneapolis Pallet Rack. You keep one point of contact for the proposed layout, scope and scheduling discussions. We review access from Highway 169 and the space available for unloading, and identify the work zones that must be isolated.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Carton flow rack with gravity wheel beds and case lanes

Carton flow shelving in use on a warehouse pick line

Storage Planning in Brooklyn Park

Nearby areas we work in regularly include 93rd Avenue, Highway 169, Boone Avenue.

Medical device supply

Light manufacturing

Regional distribution

How Carton Flow Rack Works

Cases advance to the picker instead of the picker hunting for cases.

Inclined wheel beds

A full-width wheel bed or roller track sits on a slight incline inside a standard bay, so cases move forward under their own weight without power.

Pick from a fixed position

The picker always reaches for the same forward spot in the lane. Travel time drops, and so does the time spent searching for the next case.

Restock from behind

Replenishment loads the high end of the lane from a separate aisle, so restocking never blocks or slows the pick line, and rotation stays first in, first out automatically.

One lane per SKU

Lane dividers set the width for each case size, giving every SKU its own face - a width that can be resized as your product mix shifts.

What a Carton Flow Rack Project Includes

A carton flow rack project in Brooklyn Park begins with a load and workflow review. We collect dimensions, maximum weights, SKU quantities and movement rates, then check clear height, column spacing, floor condition and forklift specifications against the proposed storage zone. We also ask how receiving, inspection and shipping share the floor so recovered positions do not simply create another congestion point.

Build the lane plan from case dimensions, carton stiffness and picks per SKU. Allocate enough reserve between replenishment runs, test both light and heavy cases, and keep hand-picking space separate from forklift replenishment. The free design consultation turns these inputs into a proposed layout with storage counts, elevations and access paths. Where two systems could work, the comparison shows the storage and operating trade-offs instead of presenting a single answer without the math.

The itemized scope identifies new rack components, supports, protection and installation. Our team handles the permit side for you. Manufacturer compatibility and actual capacities are checked before approval. Delivery timing and staging are discussed against available unloading space, and the installation area must be emptied and isolated from live warehouse traffic.

Installation and handover follow the approved drawing. Moving parts on flow or pushback systems require travel checks with representative loads; fixed systems require their specified alignment and protection, with the rack anchored to the floor. The completed Brooklyn Park arrangement includes the agreed capacity documentation and operating guidance. If future changes add levels, heavier loads or a new product mix, the configuration should be reviewed again rather than assuming the original ratings still apply.

Case and each picking operations

Order fulfillment lines carrying many active SKUs

Grocery, beverage, and consumer goods distribution

Kitting and light assembly feed lines

Bays that need reserve pallets stacked above the pick face

Call (612) 509-6602

Recent Installations

Racking projects completed for warehouses across the Twin Cities metro.

View More Projects

Get a Carton Flow Rack Quote for Your Brooklyn Park Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (612) 509-6602.

Minneapolis Pallet Rack

2429 Nicollet Ave.

Suite C

Minneapolis, MN 55404

(612) 509-6602

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Minneapolis Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.